Work Begins to Boost LHC Luminosity

The Large Hadron Collider (LHC) at CERN officially entered a new stage with a groundbreaking ceremony to mark the start of the civil-engineering work for its High-Luminosity LHC (HL-LHC) upgrade. By 2026, this major project will considerably improve the performance of the LHC, increasing the number of collisions in the large experiments and boosting the probability for discovering new physics phenomena.

The LHC started colliding particles in 2010. Inside the 27-km LHC ring, bunches of protons travel at almost the speed of light and collide at four interaction points. These collisions generate new particles that are measured by detectors surrounding the interaction points. Physicists from all over the world analyze these collisions, deepening our understanding of the laws of nature.

While the LHC is able to produce up to one billion proton-proton collisions per second, the HL-LHC will increase this luminosity by a factor of between five and seven, allowing about 10 times more data to be accumulated between 2026 and 2036. Physicists will be able to investigate rare phenomena on a whole new level, according to CERN, and make more accurate measurements. For example, the LHC allowed physicists to unearth the Higgs boson in 2012, thereby making great progress in understanding how particles acquire their mass. The HL-LHC upgrade will allow the Higgs boson’s properties to be defined more accurately, and to measure with increased precision how it is produced, how it decays and how it interacts with other particles. In addition, scenarios beyond the Standard Model will be investigated, including supersymmetry, theories about extra dimensions and quark substructure.

“The High-Luminosity LHC will extend the LHC’s reach beyond its initial mission, bringing new opportunities for discovery, measuring the properties of particles such as the Higgs boson with greater precision, and exploring the fundamental constituents of the universe ever more profoundly,” says CERN Director-General Fabiola Gianotti.

The HL-LHC project started as an international endeavor involving 29 institutes from 13 countries. It began in November 2011 and two years later was identified as one of the main priorities of the European Strategy for Particle Physics, before the project was formally approved by the CERN Council in June 2016. After successful prototyping, many new hardware elements will be constructed and installed in the years to come. Overall, more than 1.2 km of the current machine will need to be replaced with many new high-technology components such as magnets, collimators and radiofrequency cavities.

The secret to increasing the collision rate is to squeeze the particle beam at the interaction points so that the probability of proton-proton collisions increases. To achieve this, the HL-LHC requires about 130 new magnets, including 24 new superconducting focusing quadrupoles to focus the beam and four superconducting dipoles. Both the quadrupoles and dipoles reach a field of about 11.5 tesla, as compared to the 8.3 tesla dipoles currently in use in the LHC. Sixteen brand-new crab cavities will also be installed to maximize the overlap of the proton bunches at the collision points. Their function is to tilt the bunches so that they appear to move sideways, just like a crab.

Another key ingredient in increasing the overall luminosity in the LHC is to enhance the machine’s availability and efficiency. For this, the HL-LHC project includes the relocation of some equipment to make it more accessible for maintenance. The power converters of the magnets will thus be moved into separate galleries, connected by new innovative superconducting cables capable of carrying up to 100 kA with almost zero energy dissipation.

“Audacity underpins the history of CERN and the High-Luminosity LHC writes a new chapter, building a bridge to the future,” says Frédérick Bordry, CERN’s director for accelerators and technology. “It will allow new research and with its new innovative technologies, it is also a window to the accelerators of the future and to new applications for society.”

To allow all these improvements to be carried out, major civil-engineering work at two main sites is needed, in Switzerland and in France. This includes the construction of new buildings, shafts, caverns and underground galleries. Tunnels and underground halls will house new cryogenic equipment, the electrical power supply systems and various plants for electricity, cooling and ventilation.

During the civil engineering work, the LHC will continue to operate, with two long technical stop periods that will allow preparations and installations to be made for high luminosity alongside yearly regular maintenance activities. After completion of this major upgrade, the LHC is expected to produce data in high-luminosity mode from 2026 onwards. By pushing the frontiers of accelerator and detector technology, it will also pave the way for future higher-energy accelerators.